To fix a sinking chair is not impossible, because actually a sinking office chairs can be fixed in many ways.
You can use PVC piping to prop the chair up, a hose clamp to stop it moving.
Or you can repair the chair's cylinder altogether.
With so many of us now working behind a desk, either at home or in the office.
One of the most important pieces of furniture that we use is our office chair.
You should ensure that it is the right size and height for your frame as well as that it is comfy.
However, what do you do if your office chair is broken and keeps sinking?
Well, you're in luck. Here we'll tell you several different ways and teach you how to fix a sinking office chair.
One of the main reasons why your office chair keeps sinking is because the locking mechanism used to hold the cylinder in an extended position is broken.
This means that the cylinder can slide down, causing your chair to sink.
A quick and easy way to prevent this is to not allow the cylinder to collapse on itself. You can do this simply by blocking it with a piece of PVC piping.
You will need to take apart the base of your office chair and cut the PVC pipe to your desired size.
Read More >> Top 5 Best Kneeling Chairs (2021 Review)
Obviously the more piping you use the higher your chair will sit, and place the piping over the cylinder. Put the chair back together again.
However, it is worth keeping in mind that you will not be able to adjust the height of your office chair without resizing the PVC piping.
A hose clamp
Another quick way to fix the problem of a sinking office chair is to use a hose clamp. Again, this will also stop you from being able to adjust the height of your chair.
This method also works by locking the cylinder in position and stops the seat from compressing down into it.
You will need to make sure that your hose clamp is big enough to fit around the cylinder and that the cylinder is covered with duct tape first.
Read More >> Best Rocking Office Chairs (2021 Review)
The friction from the duct tape will allow the clamp to hold the cylinder in place and stop it from sliding.
If you do decide to change the height of your chair then this method is much easier to change than the PVC pipe.
Replacing the cylinder
If you are able to then replacing the cylinder is certainly the best option.
It will allow your office chair to work as designed, meaning that you will be able to adjust your chair to your desired height without the need for tools.
A standardized cylinder replacement will work for about 95% of office chairs.
So, if you are using your chair a lot then it is worth the extra investment for this longer-term solution to the problem of a sinking chair.
Not only is this a more permanent solution but it will also look much more professional.
Read More >> Top 5 Best Armless Office Chairs (2021 Review)
Final Thoughts on Fixing a Sinking Chair
A sinking office chair can be a real struggle that will reduce comfort. Wither your chair needs replacing the cylinder or a hose clamp, it could even need PVC piping.
Neither of these options are too hard to do, and it is supposed to get you sinking chair fixed.
But in case you found out your chair doesn't need any of these options, then you can try getting an expert or replacing the chair, we actually offer the best options for chairs here.
Hopefully you got your chair fixed with the above fixes.